Toro TMC-212 manual

Setting the Watering Day Schedule

Each program can have its own Calendar, Interval, Odd or Even schedule, but only one schedule can be active at a time for that program. The watering day schedule or OFF shown in the display when the control dial is in the WATERING DAYS position will be the active schedule for that program.

• To set a Calendar schedule, continue below.

• To set an Interval schedule, continue on page 23.

• To set an Odd or Even schedule, continue on page 24.

• To turn a program Off, refer to page 26.

Setting a Calendar Schedule

-Turn the control dial to the WATERING DAYS position.

- Check the PROGRAMS switch setting. If necessary, reposition the switch to select the desired program.

-The current watering schedule will be displayed. If CAL (Calendar) is not displayed, press the +/ON or –/OFFbutton as needed to select CAL.

-Press the NEXT button. The watering days currently set for this program will be displayed; su (Sunday) will begin flashing.

-To select Sunday as a watering day, press the +/ON button. To remove Sunday from the schedule, press the –/OFFbutton; mo (Monday) will now begin flash- ing. Continue to select or remove each day of the week until only the desired watering days are shown.

6. -To set a Calendar schedule for another program, return to step.

- When you have completed setting the Calendar schedule for each program (as needed) return the control dial to the RUN position.

22