About Automatic Circuit Protection

The TMC-212 features built-in circuit protection to help prevent damage to the controller caused by excessive current draw on the station and/or pump start/master valve circuits. This condition is generally caused by a shorted valve wire splice, faulty valve solenoid and/or pump start relay.

If the controller detects an overload

condition on a station, it will bypass the affected station(s) during an auto-

matic watering cycle. The word

“FUSE” and the defective station number(s) will be displayed. All remaining stations will continue to operate as programmed.

If the overload condition occurs on the pump start/master valve circuit, the controller will immediately discon- tinue automatic operation and alter- nately display: “FUSE - “MV.”

To clear the warning display, press the –/OFFbutton. The controller will resume operation as scheduled and will attempt to run all stations as programmed.

IMPORTANT: Clearing the display does not correct the cause of the problem. The controller will continue to bypass the affected station(s) or discontinue operation until the overload condition is eliminated. Before continuing to operate the controller, identify and resolve the cause of the problem. In most cases, this condition is caused by a faulty valve solenoid, pump start relay and/or a shorted wire splice.

Adding a 2-station Expansion Module

Note: Expansion modules are available in Standard- surge (TSM-02) and High-surge (TSM-02-H) versions. Although the TSM-02-H module can be used in any TMC-212 controller, it will only provide high (6.0 Kv) surge protection when installed in Outdoor controller models TMC-212-ODH and TMC-212-ODH-50H.

1.Turn the control dial to the OFF position.

2.Remove the access cover.

3.Place the back of the station module squarely between the guides of the first open expansion slot (from left to right). Pushing lightly on the bottom of the module, slide it upward until it locks into position.

4.To connect the valve wires, refer to “Connecting The Valves” on page 7.

5.Reinstall the access cover.

6.To set the station time, refer to “Setting Station Times” on page 28.

7.To test the operation of the added station(s), refer to

“Manual Mode” on page 31.

37

Page 38 Page 40
Page 39
Image 39
Toro TMC-212 manual About Automatic Circuit Protection, Adding a 2-station Expansion Module
Page 38 Page 40

TMC-212 specifications

The Toro TMC-212 is a robust yet sophisticated irrigation controller designed for optimal landscape management in various settings, including residential, commercial, and municipal applications. This device offers an exceptional balance of advanced technology and user-friendly operation, making it an essential tool for maintaining healthy and vibrant landscapes.

One of the standout features of the TMC-212 is its intuitive interface, which allows users to program multiple zones with ease. With the ability to control up to 12 irrigation zones, the TMC-212 accommodates a wide range of landscape layouts, ensuring that each area receives the appropriate amount of water. The controller also supports both manual and automatic operation modes, giving users the flexibility to adjust settings depending on weather conditions and seasonal requirements.

Equipped with Toro's innovative WaterSense technology, the TMC-212 is designed to conserve water while maintaining optimal irrigation schedules. This feature integrates real-time weather data and site-specific information to adjust watering schedules dynamically, helping to minimize waste and reduce overall water consumption. The controller can be connected to rain sensors and soil moisture sensors, further enhancing its ability to respond to environmental conditions.

The TMC-212 also stands out for its wireless connectivity options. Users can connect the controller to a smartphone or tablet via Bluetooth, providing them with the convenience of remote access. This feature allows for quick adjustments and real-time monitoring, ensuring that irrigation needs can be met swiftly and efficiently, even when users are away from the site.

In terms of durability, the Toro TMC-212 is built to withstand various environmental conditions. The rugged design ensures that the controller remains functional in outdoor settings, resisting the effects of moisture, dust, and temperature fluctuations. This reliability is crucial for ensuring consistent landscape care.

For ease of installation, the TMC-212 comes with clear instructions and can be integrated into existing systems without significant modifications. The user-friendly design, coupled with its advanced irrigation management features, makes the Toro TMC-212 a valuable asset for anyone looking to enhance their landscape irrigation practices.

In summary, the Toro TMC-212 is a cutting-edge irrigation controller that combines advanced features, user-friendly technology, and durable construction. It addresses the evolving needs of modern landscape management, making it an ideal choice for professionals and property owners alike. Whether you’re managing a large commercial property or a small residential garden, the TMC-212 provides the tools needed for efficient, effective irrigation.
Top Page Image Contents