53
Getting Started
Using the computer for the first time
5.375 x 8.375 ver 2.3
The function of the secondary (right-hand) button depends on
the program you are using. It usually corresponds to the right
mouse button. Check your program’s documentation to find
whether it uses the right mouse button.
Disabling or enabling the TouchPad
The TouchPad is enabled by default. To change the enable/
disable TouchPad setting by using the Fn + F9 keys, see
“Disabling or enabling the TouchPad” on page217.
You may also change the enable/disable setting as follows:
1Click Start, Control Panel.
The Control Panel window appears.
2Click Printers and Other Hardware.
3Click Mouse.
The Mouse Properties window appears.
4Click the TouchPAD ON/OFF tab.
The TouchPAD ON/OFF tab view window appears.
5Select Disable or Enable, whichever is appropriate.
6Click Apply.
7Click OK.
The Mouse Properties window closes.
8Close the Printers and Other Hardware window.
9Close the Control Panel window.