61
Getting Started
Installing additional memory (optional)
5.375 x 8.375 ver 2.3
Setting up a printer
If you started your computer with a printer connected and
turned on, it may have been detected automatically (Plug and
Play). If this is not the case, then you must install the printer
driver for the model of printer that is connected to your
computer. You can install the printer driver either by
following the instructions indicated in your printer manual, or
by using the operating system Add Printer Wizard.
If you plan to set up a printer later, click Cancel.
Using the Add Printer Wizard
To set up a printer with the Add Printer Wizard:
1Click Start, Control Panel, then Printers and Other
Hardware.
2Select Printers and Faxes.
The Printers and Faxes window appears.
Sample Printers and Faxes window
3Click Add Printer.
The Add Printer Wizard starts.