55
Getting Started
Installing additional memory (optional)
5.375 x 8.375 ver 2.3
You need a standard Phillips no. 1 screwdriver to install a
memory module.
CAUTION: To avoid damaging the computer’s screws, use a
standard Phillips no. 1 screwdriver that is in good condition.
If you are adding memory after you have started to use the
computer, begin at step 1, otherwise skip to step 2.
1Turn off the computer via the Start menu.
See “Turn Off or Shut down command” on page83.
The operating system turns off the computer.
2Unplug and remove any cables connected to the
computer.
3Close the display panel and turn the computer upside
down to locate the expansion memory slot cover.
Base of your Satellite computer
4Using a standard Phillips no. 1 screwdriver, unscrew the
two screws that secure the expansion memory slot cover,
then remove the memory slot cover.
Memory
slot cover