59
Getting Started
Installing additional memory (optional)
5.375 x 8.375 ver 2.3
12 Replace the screws and tighten them.
13 Turn the computer over and reconnect any cables you
removed.
14 Turn on the computer.
To verify that the computer correctly recognizes the
memory, click Start, Control Panel and click
Performance and Maintenance. Click System to view
the recognized memory.
15 If the computer does not recognize the memory, shut
down the computer, remove the memory slot cover, and
make sure the memory module is seated properly, as
described in step 8.
Removing a memory module
1Follow steps 1 through 6 in “Installing additional
memory (optional)” on page 54.
2Gently push the memory clips outward until the memory
module pops up.
Removing the memory module
3Gently pull the memory module diagonally to remove it
from the slot.
4Complete the procedure by following steps 10 through 12
in “Installing additional memory (optional)” on page 54.