199
If Something Goes Wrong
Resolving a hardware conflict
5.375 x 8.375 ver 2.3

WinDVD will not function properly with “debug”

software installed.

The WinDVD application will not function properly if it
detects that debug software is present on the system. Remove
the debug software to restore functionality of WinDVD.
Minimum system requirements
WinDVD performs best when these recommended
components are present in your system:
Sound card (with 48 KHz sampling rate support)
DirectX® Foundation 6.0 or higher (Source: Microsoft)
DirectShow® 6.0 (Source: Microsoft)
DVD-ROM drive with DMA enabled (only available
with Microsoft OSR 2.1 or above with PIXX 4.0 and
USB support added)
WinDVD software
WinDVD: Error messages
This table offers descriptions and resolutions for error
messages that may appear when using WinDVD.
Error message and additional
information
Resolution
The disc in the DVD-ROM
drive is not a valid disc
type.
Valid disc types are
DVD-Video and audioCD.
Ensure the disc is a valid
disc type.
If the disc works in other
players, try using a disc
cleaner.
The disc may require fea-
tures that are not supported
by WinDVD.