49
Getting Started
Setting up other devices
5.375 x 8.375 ver 2.3
Setting up other devices

Installing additional memory (optional)

Your computer comes with enough memory to run most of
today’s popular applications. You may want to increase the
computer’s memory if you use complex software or process
large amounts of data.
Additional memory comes in various size modules. You can
install a maximum of two modules in your computer’s
expansion memory slots, located on the bottom of your
computer.
You need a standard Phillips no. 1 screwdriver to install a
memory module.
CAUTION: To avoid damaging the computer’s screws, use a
standard Phillips no. 1 screwdriver that is in good condition.
If you are adding memory after you have started to use the
computer, begin at step 1, otherwise skip to step 2.
1Turn off the computer via the Start menu.
See “Using Turn Off or Shut down” on page81.
The operating system turns off the computer.
2Unplug and remove any cables connected to the
computer.
3Close the display panel and turn the computer upside
down to locate the expansion memory slot cover.