16
Using the TV’s
Features
Picture Settings
To select the brightness
Press BRIGHT on the Remote Control to adjust the brightness. You have three
selections to choose from:
To select the picture mode
Press PICTURE on the Remote Control. You have four selections to choose from:
Notes:
• If you adjust the parameters of
the picture setting in DYNAMIC,
MILD, or THEATER mode, these
parameters will be saved in
USER mode automatically.
• If you adjust the picture settings
parameters in USER mode, these
parameters will be saved in
USER mode automatically.
• The default picture setting mode
is DYNAMIC.
There are different setting parameters for DYNAMIC, MILD, THEATER and
USER mode as described in the following table:
To adjust the picture quality
Note:
All settings except BACKLIGHT are
specific to AV1, AV2, and TV
modes. For example: BRIGHT-
NESS may be set to 80 in AV1 but
60 in AV2 Mode.
To adjust the BRIGHTNESS, CONTRAST, COLOR, SHARPNESS, TINT, and
BACKLIGHT settings individually, do the following:
1. Press MENU and press VOL
– or + to select .
2. Press CH S or T to scroll
either up or down to find the
function you need to adjust.
3. Press VOL – or + to adjust the
selected function.
4. Press MENU to return.
When you have finished adjusting
your settings, press MENU to exit.
NORMALDARK
Normal BrightnessMinimum Brightness
BRIGHT
Maximum Brightness
DYNAMIC MILD THEATER USER
MODE
PARAMETER DYNAMIC MILD THEATER USER
(factory setting)
BRIGHTNESS 50 50 50 50
CONTRAST 100 80 40 100
COLOR 50505050
SHARPNESS 3 3 3 3
TINT 0000
Function
Pressing
VOL– VOL+
BRIGHTNESS darker brighter
CONTRAST lower higher
COLOR paler deeper
SHARPNESS softer sharper
TINT reddish greenish
MENU RETURN
BRIGHTNESS [ 50]
[ 50]
[ 100]
[ 50]
[ 3]
[ 0]
ADJUST