Toshiba 32HLV66 manual Using the PC setting feature, PC Audio, To adjust the PC settings

Chapter 5: Using the TV’s features

Using the PC setting feature

You can view the image from a PC on the TV screen. The PC must be connected to the TV’s PC IN terminals

(- Installation Guide).

You can use the PC Settings feature to adjust the picture’s horizontal position/width, vertical position/height, clock phase, and sampling clock.

If the edges of the picture are cut off, readjust the Horizontal Position/Width and Vertical Position/Height. If the picture is affected by interference, readjust the Clock Phase and Sampling Clock.

To adjust the PC settings:

1 Repeatedly press +to select PC input mode

(- “Selecting the video input source to view” page 23).

2 Press Yand open the Setup menu.

3 Highlight PC Settings and press T.

Setup

Installation
Sleep Timer
PC Settings
PC Audio		No
HDMI Audio		Auto
Slide Show Interval		2 Sec
Navigate ENTER	Select CH RTN Back EXIT Exit

Note: If a PC is not connected, this feature will be grayed out in the Setup menu.

4 Press B or b to highlight the item you want to adjust. 5 Press C or c to make the appropriate adjustments.

PC Settings

Horizontal Position		0
Horizontal Width		0
Vertical Position		0
Vertical Height		0
Clock Phase		0
Sampling Clock		0
	Reset		Done

Note: The screen is disrupted momentarily when adjusting the PC settings. This is not a sign of malfunction.

•Horizontal Position:

Moves the picture left/right.

The adjustment range is within ±5 from center.*

•Vertical Position:

Moves the picture up/down.

The adjustment range is within ±5 from center.*

•Horizontal Width:

Adjusts the width of the picture.

The adjustment range is within ±5 from center.*

•Vertical Height:

Adjusts the height of the picture.

The adjustment range is within ±5 from center.*

•Clock Phase:

Helps to reduce noise and sharpen the picture. The adjustment range is within ±2 from center.*

•Sampling Clock:

Helps to reduce noise and minimize periodic vertical stripes on the screen.

The adjustment range is within ±15 from center.*

*The range of adjustment may vary slightly.

PC Audio

This function allows you to output the sound from your PC (if connected) or mute the sound from your PC and output the sound from your HDMI connection. (- Installation Guide)

To set the PC Audio:

1	Press Yand open the Setup menu.
2	Highlight PC Audio.
3	Press c and then press b to select No or Yes.
	Yes: Outputs the sound from your PC.
	No: Mutes the sound from your PC, and outputs the
	sound from the HDMI connection.
		Setup
		Installation				No
		Sleep Timer				Yes
		PC Settings
		PC Audio			No
		HDMI Audio		Auto
		Slide Show Interval		2 Sec
		Navigate ENTER	Select CH RTN Back EXIT Exit

Note: The PC Audio switch setting influences the HDMI Audio setting. If it is set to No, the HDMI Audio setting changes to Auto. If it is set to Yes, the HDMI Audio setting is set to Digital and will be grayed out.

39