Chapter 8: DVD Playback

Playing a disc

Be sure to set the MODE SELECT switch on the remote control to TV/DVD mode when using the built-in DVD.

Basic playback DVD VCD CD

1 Press pon the TV or on the remote control to turn on the TV.

Press +on the remote control or INPUT on the TV to select the Built-In DVD mode.

2 The DVD startup screen will appear on the screen.

OPEN

Welcome

3 Load the disc in the disc slot with the label side facing forward. (If the disc has a label.) Hold the disc without touching either of its surfaces, align it with the guides, and place it in position.

Note: When inserting a disc into the DVD disc slot, do not jam or force it strongly, otherwise the TV may malfunction or the disc might be damaged. If left with half the disc inserted, the disc will be loaded automatically.

4 “DISC LOADING” appears on the screen, then playback starts.

DISC LOADING

Welcome

A menu screen will appear on the TV screen, if the disc has a title menu. Press B bCcto select title, then press T. Title is selected and play commences.

5 Press zZto adjust the volume.

Volume 16

Note: When using an amplifier, adjust the volume with the amplifier.

6 Press Dto end playback.

Resume feature

Depending on the disc you are playing, when you press D

one time, the TV memorizes the location where playback is stopped. Press Sto resume the playback from the stopped location.

If you press D again or eject the disc, the TV will clear the stopped location.

Auto Play feature

If you load the disc in the TV off status, the TV is turned on and playback commences automatically. However, loading the disc may take 1-2 seconds.

About the Parental Lock screen

If the Parental Lock YES/NO screen appears after loading a disc and you want to temporarily unlock the Parental Lock, select “YES” and then input the PIN CODE following the on- screen menu.

THE PARENTAL LEVEL OF THE

PLAYER HAS BEEN SET.

PRESS "YES" TO CONTINUE.

YES

STOP

CAUTION

Never insert your finger into the disc hole when loading the disc to the disc slot.

Keep your fingers well clear of the disc slot when disc is loading or unloading. Neglecting to do so may cause personal injury.

Because of problems and errors that can occur during the creation of DVD and CD software and/or the manufacture of DVD and CD discs, Toshiba cannot assure that the DVD player contained in this television will successfully play every disc bearing the DVD and CD logos. If you happen to experience any difficulty playing a DVD and/or CD disc on the DVD player contained in this television, please contact Toshiba Customer Service.

Note: While a DVD is playing back, you cannot adjust the following:

Optical Output Format selection (- page 34)

Audio Language selection (- page 33)

DVD Audio selection (- page 57)

Menu Language selection (- page 18)

V-Chip (parental control) setting (- page 35)

DVD aspect ratio (- page 55)

If you want to set up any of the above, stop the DVD by pressing Dtwice, and then set up (- “Resume feature”).

Note: Strong static electricity may affect the DVD player’s operation and cause it not to work properly. If this happens, turn OFF the POWER, disconnect and then reconnect the AC power cord, and turn ON the TV again.

54

Page 54
Image 54
Toshiba 32HLV66 manual DVD Playback, Playing a disc, Basic playback DVD VCD CD