Toshiba 32ZT29B owner manual Dolby Digital, Adjustments, Special Sound Features

SPECIAL SOUND FEATURES

Dolby Digital

Dolby Digital is available from DVD players, some games console players, etc. These must be connected using a Scart or phono lead for the picture AND an optical or a coaxial cable for the sound see page 37.

Dolby Digital

Arrange the speakers around your normal viewing

positions (as shown on page 6) and then make sure that

the TV is set up as follows:

1	The DVD/Games console is connected to the TV using
	phono leads to the COMPONENT VIDEO INPUT or a
	Scart lead to Scart 3, and an optical or coaxial cable to
	the optical/coaxial sockets, DA-1 or DA-2.
2	The Digital input-1 (optical)/ Digital input-2 (coaxial)
	in the AV connection menu (see page 25) is set to
	EXT 3 if Scart 3 is used or EXT 4 if the equipment is
	connected to COMPONENT VIDEO INPUT.
3	If external front speakers are connected
	the external switch (found on the back
	of the TV) is set to EXT. You will not hear the centre
	channel without external front speakers connected.
4	Rear speakers are connected and the Rear speaker
	option in the Surround set up menu is set to YES.

(See next page.)

DELAY TIME…

If you sit a long way from the TV and close to the rear speakers the sound from the rear will reach you before the sound from the front. You can use a higher setting in the Delay time option to restore the correct balance.

1	Press the TV MENU button and from the Feature
	menu select Surround set up.
2	With Delay time highlighted, use the S or R button
	to change the setting to a value that suits you.
3	Press EXIT when you have finished.

!	If
	rear speakers
			are NOT
selected in the
menu, you			Surround set		up
			will not hear
from your				any sound
		rear speakers.

	Adjustments
1	Set the volume and balance of the front speakers to your preference. Play a Dolby
	Digital source and press the TV MENU button on the TV’s remote control. Select the
	Sound menu.
2	Press the Q button to highlight Surround and press R. Highlight the title, e.g. Dolby
	Digital 3/2, which is an indication of the channels available from your current sound
	source, see the table below.
3	Then press the R button and adjust the levels using the P or Q button to select the
	centre and two rear speakers in turn. Press either the Sor R button to adjust. The

number of adjustable speakers will depend upon the signal received from the DVD player. To cancel the test press the EXIT button.

!	Alternatively,		use the	Test mode							in the
									29.
	Surround set up menu, see page
	If the DVD playing is recorded				in Dolby Pro Logic,
									right, centre
	i.e. 4 channel stereo (front left, front
											.
	and rear) the TV will detect the						4 channels
										test is run
	In this instance,	when the Surround
								channels
	the TV will cycle through the four
	in use.									the DVD
	In order to get full Dolby Digital,
	player must be connected					using the
	coaxial or optical links.

Dolby Digital

1/0 = Centre speaker only.

2/0 = Front Left and Front Right only. 2/1 = Front Left and Front Right +

Rear Left and Rear Right combined. 2/2 = Front Left and Front Right +

Independent Rear Left and Independent Rear Right. 3/0 = Front Left and Front Right and Centre.

No Rear Speakers.

3/1 = Front Left and Front Right and Centre + Rear Left and Rear Right combined.

3/2 = Front Left and Front Right and Centre + Independent Rear Left and Independent Rear Right.

28