Toshiba 32ZT29B Questions and, For Your Guidance, Answers…continued, to topics, the INDEX, at the

FOR YOUR GUIDANCE

Questions and

Answers…continued

☛	…
	For quick
reference
	to topics,
see
	the INDEX	at the
back of
	this manual.

Q	I have a picture, but why have I no sound?	Q	Why doesn’t the remote control work?
	Press the volume button +j – or the sound mute		Check that the switch on the side of the remote
A kbutton.		A control is set to TV mode.
Check the Languages option in the SET UP MENU.		Check that the batteries aren’t dead and that they are
Choose English Audio.		inserted correctly.
Q	Why am I not receiving a clear analogue picture?	Q Why is there no sound coming from the front speakers?
	You may be experiencing interference or a weak		Change the setting of the speaker switch on the
A signal. First, try a different station and check your		A back of the TV.
aerial connections. Then you can fine tune, press the TV		Q
MENU button and select Set up. From the Manual			Why is there no Dolby Surround?
tuning screen highlight the channel and press SELECT.
Use the S or R buttons to select Manual fine tuning			If you are unable to obtain surround sound effects
and adjust/optimise the picture with the P and
Q buttons.		A from the rear speakers whilst playing a Dolby
		Surround video tape, check that the video recorder is a
Q Why are the colours wrong when I play an NTSC source?		stereo unit and that it is connected to the TV by means of
		one of the 21-pin Scart sockets.
		Also check that Rear speaker option in the Surround
A
	Connect the source via a Scart lead and play.	set up menu is set to YES and check you have the correct
		Dolby mode.
1	From the Set up menu select Colour. With the	Run the Surround test mode as described in the Dolby
		Pro Logic section of this manual.
	S or R button choose AUTO and then EXIT.
2	Now, go to the Picture menu and with the	Q	Why is the analogue teletext not very good?
	S or R button, adjust the Tint.
			Good text performance depends on a strong
Q		A broadcast signal. This normally requires a roof or
	Why don’t the controls on the front of the TV work?	loft aerial. If the text is unreadable, check your aerial.
		Also, go to the main index page of teletext and look for
	Check that Panel lock is not ON: using the remote	the User Guide. This will give you details of basic teletext
		operation. If you need further help, see the analogue
A control select Panel lock from the Feature menu.
		teletext section in this manual.

With the S or R buttons turn Panel lock OFF.

Q	Why don’t the fP ebuttons work?		Q Why do I not have any analogue teletext sub-pages?
					There are none broadcast or they have not yet
				A loaded. Press the X(B) button to access. See the
	You have no programmes chosen as Favourites.			analogue teletext section.
A From the digital MAIN MENU select Service List.			Q
Highlight the programme(s) and with the S and R buttons					Why is there no digital teletext?
turn Favourite to Yes.
You have Programme skip : On in the Manual tuning		39			There is none broadcast at this time, try later or use
TV MENU.				A analogue text in the meantime.