Toshiba 32ZT29B Connecting and turning on your new TV, The TV back connections…, video recorder

SETTING UP

Connecting and turning on

your new TV

To conserve energy it is best to turn your TV off, although remember to leave it in Standby if the timer has been set to record a digital broadcast.

The TV back connections…

the back of your TV

1

SCART 3

2

SCART 2 SCART 1

3

IN

video recorder

OUT

IN/OUTSAT

Before connecting any external equipment always make sure that the power is OFF.

CONNECT THE AERIAL TO THE SOCKET ON THE BACK OF THE TELEVISION.

When connecting your video recorder you must use a full 21-pin SCART lead AND an aerial cable.

Before running Auto Tune put your video recorder to Standby.

1The AERIAL must go into the socket marked on the back of the TV.

2AERIAL CABLE from the TV socket (marked VCR) to AERIAL IN on back of the VCR.

3SCART LEAD from Scart 2 on the back of the TV to the IN/OUT SCART socket on the back of the VCR. Without this, you will not be able to view videos or record digital programmes.

!	If you connect				the		VCR to either
								of the TV,	the
Scart		1 or	3 on the back						.
				respond		to any timer			events
VCR will not

If you use your television to display completely still images,

or moving pictures which have a permanent still image superimposed i.e. broadcast network logos,

it is always advisable to reduce BOTH the brightness and contrast settings.

6