Chapter 5: Setting up your TV
34
After the time zone has been set, you will be asked to
set the current Daylight Saving Time status.
To set the Daylight Saving Time status:
1無 Press t or u to select Yes or No, highlight Done,
and then press .
Viewing the system status
To view the system status:
1無 Press and open the Setup menu.
2無 Highlight Installation and press .
3無 A new set of Installation menu icons will appear.
Open the System Status menu, highlight System
Information, and press .
4無 Press tu to scroll through the menu bar to select
the Factory Defaults or Support Information and
view the related information.
To close the screen and return to the
Installation menu:
Highlight Done and press .
To return to normal viewing:
Press .
Reset Factory Defaults
To reset all settings and channels to their
factory default values:
1無 Press and open the Setup menu.
2無 Highlight Installation and press . A new set of
Installation menu icons will appear.
3無 Open the System Status menu, highlight System
Information, and press .
4無 Press tu to scroll through the menu bar to select
Factory Defaults.
5無 Highlight Yes and press .
6無 (If PIN code has been set, enter your PIN code. Press
t or u to select Done and press .) A warning
message will appear, select Yes and press , the TV
will turn off automatically after a few seconds. After
the TV turns off, unplug the TV power cord and then
plug it in again to complete the reset process.
To cancel the reset:
Select No and press in step 5 above.