101
Basic features

Using the HDMI® RGB Range feature

Other HDMI® CEC Control functions

When Enable HDMI® CEC Control and all items in the
HDMI® CEC Control Setup menu are set to On, the following
functions will be enabled:
When you turn on the amplifier, change its input source, or adjust the
sound volume, the sound will be output from the amplifier’s speakers
even if TV Speakers has been selected. Turn the TV off and on again
to output the sound from the TV speakers.
Using the HDMI® RGB Range feature
The RGB Range setting requires appropriate HDMI® source
devices. If your HDMI® source device does not support this feature,
the TV may not work properly when it is enabled.
Item: Description:
TV Auto Power If a HDMI® CEC device is turned on, the TV turns on automatically.
Auto Standby If the TV is turned off, it will send a message to turn off all of the
HDMI® CEC devices connected to the TV.
Amplifier If Amplifier Control is set to On, you can adjust the sound volume or
turn off the sound using the remote control.
Speaker Preference With this item, you can set your audio output p reference to the TV
speakers or the amplifier. When this item is set to Amplifier, the remote
control can be used to adjust or mute the volume of the audio. This
item will not be available and set to TV Speakers automatically unless
a HDMI® CEC compatible audio receiver is connected.
Item: Description:
RGB Range: Auto Adjusts the RGB full range signal automatically. When Limited is
selected, the RGB output signal is output in the range of 16 to 235.
When Full is selected, the RGB output signal is output in the range of 0
to 255.
NOTE