169
Advanced features
Network Device Setup
5Input the device name by using the Software Keyboard. To
save your setting, press the BLUE button.
6Select Done. Press the OK button.
7If you want to limit access from unexpected Media Controllers,
press the (/ arrow) buttons to select On. Press the OK
button.
8If you want to proceed with registration of Media Controllers,
press the (/ arrow) buttons to select Yes. Press the OK
button.
9Press the (/ arrow) buttons to select the MAC address of
the Media Controller you want to accept. Press the OK button.
The box is selected. To clear the selection, press the OK
button.
10 Press the right arrow button to select Done. Press the OK
button.
11 Press the (/ arrow) buttons to adjust to the desired volume.
Press the OK button.
12 If you want to wake up the TV by using the Media Controller,
press the (/ arrow) buttons to select Yes. Press the OK
button.
Device Name setup
The device name as a Media Renderer can be changed.
1Press the MENU button. Select NETWORK, Network
Device Setup, and then press the OK button.
2Press the (/ arrow) buttons to select Device Name Setup,
and then press the OK button.
3Select the Device Name field. Press the OK button. The
Software Keyboard screen appears.
4Input the device name by using the Software Keyboard. To
save your setting, press the BLUE button.
5Select Done. Press the OK button.
The maximum number of characters allowed for the device name is
15. Only 0-9, A - Z can be used in the device name.
NOTE