170 Advanced features
Network Device Setup
Media Controller setup
You can limit which Media Controller can control this TV. If
Access Control is enabled, only those Media Controllers with a
check will be allowed to control the TV.
1Press the MENU button. Select NETWORK, Network
Device Setup, and then press the OK button.
2Press the (/ arrow) buttons to select Media Renderer
Setup, and then press the OK button.
3Press the (/ arrow) buttons to select Media Controller
Setup. Press the OK button.
4Press the (/ arrow) buttons to highlight Access Control.
Press the (/ arrow) buttons to select On.
5Press the (/ arrow) buttons to select Media Controller.
Press the OK button.
6Press the (/ arrow) buttons to select the MAC address of
Media Controller you want to accept.
7Press the OK button. The box is selected. To clear the
selection, press the OK button.
8Press the right arrow button to select Done. Press the OK
button.
❖You can select up to 8 Media Controllers.
❖If you would not like to limit the Media Controllers for this TV,
set Access Control to Off.
❖Devices other than Media Controller may be displayed in the list.
❖Confirm the MAC address of Media Controller and select it.
Maximum volume setup
This feature allows you to set the maximum volume of the TV
when it receives volume operation commands from a Media
Controller.
1Press the MENU button. Select NETWORK, Network
Device Setup, and then press the OK button.
2Press the (/ arrow) buttons to select Media Renderer
Setup, and then press the OK button.
3Press the (/ arrow) buttons to highlight Maximum
Volume Setup.
NOTE