86 Basic features

Selecting the video input to view

To temporarily program the CH RTN button with a particular
channel:
1Tune to the channel you wish to program to the CH RTN
button.
2Press and hold the CH RTN button for approximately 4
seconds until the message “Memorized” appears. The channel
has been programmed to the CH RTN button.
3You can then change channels repeatedly, and when you press
the CH RTN button, the memorized channel is tuned to.
After pressing the CH RTN button and then changing channels
again, the memory is cleared and the button functions as Channel
Return.
Selecting the video input to view
To select the video input to view:
1Press the INPUT button on the remote control or TV control
panel.
2Change the input:
❖Press 0–8.
❖Repeatedly press the (/ arrow) buttons, and then press
the OK button.
❖Repeatedly press the INPUT button.
Inputs
0 ANT/CABLE
1Video 1
2Video 2
3 ColorStream HD1
4HDMI 1
5HDM 2
6HDM 3
7HDM 4
8PC