56 Initial Setup and Menu
IR Blaster Setup
If a model has more than one Code Set, a message will appear
stating “This model has more than one Code Set. Please select and
test your preferred Code Set.” You will need to choose a code set
using the ( / arrow) buttons and perform the Test option to
ensure the correct Code Set has been selected.
The Test option is available when the Device Type, Brand, Model
Name/Code Set have all been setup.
7To select the TV Input to which the IR device is connected, use
the (/ arrow) buttons to select from the following options:
❖(Only audio is selected as this device type)
❖Video 1
❖Video 2
❖ColorStream HD 1
❖Colorstream HD 2 (If selected)
❖HDMI 1
❖HDMI 2
❖HDMI 3
❖HDMI 4
❖PC (if selected).
PC or ColorStream HD2 inputs depend on the shared PC input.
8To set up the Guide Control, use the (/ arrow) buttons to
select:
❖TV (this is the default)
❖Device
9To set up the Volume control, use the (/ arrow) buttons to
select:
❖TV (this is the default)
❖Amplifier
If the Amplifier option is selected, the Volume Up/Down and
MUTE buttons will control the amplifier through the IR
blaster.
NOTE
NOTE
NOTE