126 Picture and Sound Controls
Adjusting the audio
Adjusting the range
You can adjust bass and treble.
1Press the MENU button. Select SETTINGS, SOUND, and
then Bass or Treble.
2Press the (/ arrow) buttons to adjust the range, and then
press the EXIT button.
Selecting the optical audio output format
You can select the optical audio output format when you connect a
Dolby® Digital decoder or other digital audio systems to the TV’s
DIGITAL AUDIO OUT terminal.
1Tune to a digital source on the ANT/CABLE input.
2Press the MENU button. Select SETTINGS,
PREFERENCES, AV Connection, and then press the OK
button.
3Press the (/ arrow) buttons to select Digital Audio
Output.
4Press the (/ arrow) buttons to select Auto or PCM. Press
the EXIT button.
Using the Dolby® Digital Dynamic Range Control feature
You can further compress Dolby® Digital and Dolby® Digital Plus
dynamic range so you can switch from digital to analog broadcasts
at the same dynamic range.
1Press the MENU button. Select SETTINGS, SOUND, and
then Dynamic Range Control.
2Press the (/ arrow) buttons to select On.
This feature is available when Dolby® Digital or Dolby® Digital Plus
is input to the TV in the following situations:
❖When tuned to a digital RF channel
❖When an HDMI® input is used
This feature is automatically set to Off when Dynamic Volume
(Audyssey Dynamic Volume®) is set to Low or High.
This feature will also affect Digital Audio Output when the optical
audio output format is set to PCM.
NOTE