Toshiba 42WH18B, 50WH18B Dolby Digital, Adjustments, Digital input-1 optical/ Digital input-2

SPECIAL SOUND FEATURES

Dolby Digital

Dolby Digital is available from DVD players, some games console players, etc. These must be connected using a Scart or phono lead for the picture AND an optical or a coaxial cable for the sound see page 25.

Dolby Digital

Arrange the speakers around your normal viewing positions

(as shown on page 6) and then make sure that the TV

is set up as follows:

1	The DVD/Games console is connected to the TV using
	phono leads to the COMPONENT VIDEO INPUT or a
	Scart lead to Scart 3, and an optical or coaxial cable to
	the optical/coaxial sockets, DA-1 or DA-2.
2	The Digital input-1 (optical)/ Digital input-2
	(coaxial) in the AV connection menu (see page 17) is

set to EXT 3 if Scart 3 is used or EXT 4 if the equipment is connected to COMPONENT VIDEO INPUT.

DELAY TIME…

If you sit a long way from the TV and close to the rear speakers the sound from the rear will reach you before the sound from the front. You can use a higher setting in the Delay time option to restore the correct balance.

1	From the Feature menu select Surround set up.
2	With Delay time highlighted, press the R button
	then use the S or R button to change the setting to a

value that suits you.

3

4

If external front speakers are connected the external switch (found on the back

of the TV) is set to EXT. You will not hear the centre channel without external front speakers connected.

Rear speakers are connected and the Rear speaker option in the Surround set up menu is set to YES. (See next page.)

3 Press EXIT when you have finished.

!	If
	rear speakers
		are NOT
selected in the
		Surround
menu,			set up
	you will
from your		not hear any		sound
		rear speakers.

1

2

Adjustments

Set the volume and balance of the front speakers to your preference.

Play a Dolby Digital source and press the Mbutton on the TV’s remote control. The title, e.g. Dolby Digital 3/2, is an indication of the channels available from your current sound source, see the table.

3	To adjust the levels, use the P or Q button to select the centre and two rear
	speakers in turn. Press either the S or Rbutton to adjust. The number of
	adjustable speakers will depend upon the signal received from the DVD player.
4	To cancel the test press the EXIT button.

!	Alternatively,				use the Test mode in the
	SURROUND	SET UP menu, see page 19.
						in Dolby Pro Logic,
	If the DVD playing is recorded
	i.e. 4 channel		stereo (front left, front right, centre
								.
	and rear) the TV will detect the						4 channels
								Test Mode
	In this instance,			when the Surround
							the four channels
	is run the TV will cycle through
	in use.							the DVD
	In order to get full Dolby Digital,
	player must be connected					using the coaxial
	or optical links.

Dolby Digital

1/0 = Centre speaker only.

2/0 = Front Left and Front Right only. 2/1 = Front Left and Front Right +

Rear Left and Rear Right combined. 2/2 = Front Left and Front Right +

Independent Rear Left and Independent Rear Right. 3/0 = Front Left and Front Right and Centre.

No Rear Speakers.

3/1 = Front Left and Front Right and Centre + Rear Left and Rear Right combined.

3/2 = Front Left and Front Right and Centre + Independent Rear Left and Independent Rear Right.

18