Operations
(Continued)
AUTO SET 
ON/STANDBY
KEYSTONE
MARKER LASER
POINTER
PJ
,
, 
, 
| ||
MENU | ENTER |
|
RGB | VIDEO CAMERA |
|
RESIZE | RESET FREEZE | RESET |
|
| |
| MUTE CALL | RESIZE |
Changing the picture size
Pictures are projected at the maximal projection size regardless of the signal types. Optionally you can change the picture size to through size or enlarge it.
Press RESIZE.
Each time the button is pressed, the picture size changes from the center of the picture.
When the picture size does not correspond with the projection area, the picture can be moved by pressing , , and .
When the picture size is smaller than the projection area:
:To move the picture upward
:To move the picture down
:To move the picture leftward
:To move the picture rightward
When the picture size is larger than the projection area:
:To view the upper side of the picture
:To view the lower side of the picture
:To view the left side of the picture
:To view the right side of the picture
Notes
•Picture size returns to normal after the power is turned off. The values are not saved.
•You may not change the picture size depending to the signal.
•Pictures of VGA signals, etc. may be slightly inferior in quality at the initial size because they are enlarged.
•The picture returns to the normal position when the RESET button is pressed after the picture is moved.
•The picture may not be projected properly while moving the picture.
CONTENTS | 24 |
