Operations
Picture projection
CAUTION
Do not look into the projection lens while operating the projector.
Preparation
•Install and connect the projector properly.
•Take off the lens cover.
•Set the POINTER/PJ to “PJ”.
| SELECT/ADJUST |
|
|
| ON |
ON/STANDBY MENU | ENTER | INPUT |
|
| LAMP |
|
| TEMP |
1 | 3 Indicators |
|
|
5 | 4 |
AUTO SET | ON/STANDBY | 1 |
KEYSTONE | ||
MARKER LASER
POINTER
PJ
| ||
MENU | ENTER |
|
RGB | VIDEO CAMERA | 3 |
RESIZE | RESET FREEZE |
1 Press ON/STANDBY.
Both the ON and LAMP indicators light up in green.
ON | ON |
On (Green) | On (Green) |
LAMP | LAMP |
Flashing (Green) | On (Green) |
| |
2 Turn on the connected | |
equipment and put it in | |
playback mode. |
|
CONTENTS | 21 |
3 Select the input source.
(On the remote control)
Press RGB or VIDEO.
(On the control panel of the main unit)
Press INPUT repeatedly.
Each time the button is pressed, the source indication on the screen changes as follows:
→ RGB: | To project pictures from a | |
| → | computer connected to RGB |
| INPUT. | |
|
| |
| Video: | To project pictures from a |
| → | video player connected to |
| VIDEO INPUT. | |
|
| |
Camera: To project pictures from a document imaging camera. (For document imaging camera model only)
4 Adjust the picture size by turning the zooming ring.
Turn to the right to enlarge the picture.
Turn to the left to reduce the picture.
5 Focus on the picture by turning the focusing ring.
A still picture is recommended for focusing.
(Continued)
