4 PRINTING FROM UNIX

Option Value

Alternate Value

Description

 

 

 

staple=9

 

Put 2 staples in the middle of a landscape page and fold

 

 

the paper in half vertically along the staple line (saddle

 

 

stitching). This command works in conjunction with

 

 

booklet printing. This command has no affect when the

 

 

paper is fed from the long-edge side.

 

 

 

If this option is not specified, the printer’s default value will be used.

Example: The command to staple in the upper left corner of a long edge feed portrait page is “lp -o staple=1 filename”. The value for the stapling position depends on the paper size, the paper feed direction, and the print direction. This function is not available for all paper sizes and the users should refer to the copier manual for a list of compatible paper sizes. In particular, A5, A6 and statement paper sizes will not work with this function.

Select [Tray 2] for stapling with the Finisher MJ-1101 (optional).

‰Output Bin

The output bin can be specified using the following options.

Option Value

Alternate Value

Description

 

 

 

inner

 

Select the inner tray.

 

 

 

bin1

 

Select the upper output tray of the Finisher (optional).

 

 

 

bin2

 

Select the lower output tray of the Finisher (optional).

 

 

 

If the finisher (optional) is not installed on the equipment, the default output tray will be used (inner). If the finisher option is installed on the equipment, the default output tray will be used (bin2).

Example: The command to specify output bin 1 is “lp -o bin1 filename”.

‰Hole Punching

When the hole punch option is installed it can be activated using the following option.

Option Value

Alternate Value

Description

 

 

 

punch=0

nopunch

Hole punching is turned off.

 

 

 

punch=1

 

Hole punch on long edge without rotation.

 

 

 

punch=2

 

Hole punch on short edge without rotation.

 

 

 

punch=3

 

Hole punch on long edge with 180 degree rotation.

 

 

 

punch=4

 

Hole punch on short edge with 180 degree rotation.

 

 

 

If this option is not specified, the default value of “nopunch” will be used.

This function is not available for all paper sizes and the users should refer to the copier manual for a list of compatible paper sizes. In particular, A5, A6 and statement paper sizes will not work with this function.

Example: The command to hole punch the long edge feed portrait page is “lp -o punch=1 filename”.

126 Printing from an Application