2 PRINTING FROM WINDOWS

[Center Double] can be used to create a booklet from a document that has been already created as a paginated booklet. To create a paginated booklet from a normal document, perform the booklet printing in the 2-Sided Printing option.

yThe selectable options vary depending on the paper size.

yThe "Staple" option is available only when the Finisher (optional) is installed.

y[Center Double] can be selected only when the Saddle Stitch Finisher (optional) is installed.

yThe "Staple" option is not available when 2-Sided printing is selected together with the Magazine sort function.

yStapling cannot be set when the following paper sizes are selected in the [Print Paper Size] box in the Basic Tab.

-A5

-A6

-(305 x 457mm)

-Statement

-(12 x 18”)

-A4 Tab

-Letter Tab

-(320 x 450 mm)

-(320 x 460 mm)

-Custom Paper Size

yStapling cannot be set when the following paper types are selected at the [Paper Type] box in the Basic Tab.

-Thick 4

-Special 1

-Special 2

-Transparency

-Thick 4 (Back)

-Special 1 (Back)

-Special 2 (Back)

For the detailed instructions on how to print with the [Staple ] setting, see the following page: P.73 “Stapling”

5)Hole Punch

This sets whether a print job is printed with hole punches.

-Center Top — Select this to create holes along the top edge and print.

-Middle Left — Select this to create holes along the left side and print.

yHole punching can be selected only when a hole punch unit (optional) is installed.

yThe "Hole Punch" option is not available when 2-Sided printing is selected together with the Magazine sort function.

For the detailed instructions on how to print with the [Hole Punch ] setting, see the following page: P.73 “Hole Punching”

Setting Up Print Options 31