2 PRINTING FROM WINDOWS

‰Stapling

You can staple sets of paper to exit from the equipment.

Stapling is not available if a finisher (optional) is not installed.

Stapling the paper

1 Display the Finishing tab.

2 Check the [Staple] check box. Then select how to staple.

Upper Left — Select this to staple the printed document at the upper left.

Upper Right — Select this to staple the printed document at the upper right.

Center Top — Select this to double staple the printed document along the top edge.

Middle Left — Select this to double staple the printed document along the left side.

Center Double — Select this to fold and double staple the printed document in the center.

yThe selectable options vary depending on the paper size.

y[Center Double] can be selected only when the Saddle Stitch Finisher (optional) is installed and configured on the Configuration tab.

3 Set any other print options you require and click [OK].

4 Click [OK] or [Print] to send the print job. y The output is stapled for each copy.

‰ Hole Punching

Select this to punch holes on printed sheets of paper to exit from the equipment.

Hole Punching is not available if a hole punch unit (optional) is not installed.

Punching holes

1 Display the Finishing tab.

2 Check the [Hole Punch] check box. Then select how to hole punching.

Center Top — Select this to create holes along the top edge.

Middle Left — Select this to create holes along the left side.

3 Set any other print options you require and click [OK]. 4 Click [OK] or [Print] to send the print job.

yThe output is hole punched.

Printing with Best Functions for Your Needs 73