Toshiba 353, 452, 453, 350 service manual Bypass feed sensor, Sensor plate

(3)Take off the bypass separation roller assem- bly.

(4)Detach the cover, the arbor, and the clutch spring from the shaft, and then take off the bypass separation roller.

(A-11) Bypass feed sensor

(1)Take off the bypass unit ( Chapter 9.4 (A-1)).

(2)Take off the lower plate ( Chapter 9.4 (A-10)).

(3)Remove 1 screw and take off the sensor plate.

(4)Disconnect 1 connector, release the latch to take off the bypass feed sensor.

Note:

Be careful not to come off the sensor arm and the sensor spring after taking off the sensor.

Bypass separation roller assembly

Fig. 9-428

Shaft

Arbor

Clutch

spring

Cover

Bypass separation roller

Fig. 9-429

Screw

Sensor plate

Fig. 9-430

Bypass feed sensor

Sensor Spring

Sensor arm

Fig. 9-431

9

© 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved 9 - 17	e-STUDIO350/352/353/450/452/453
	PAPER FEEDING SYSTEM