13

(5)Thermistor/Heater status counter control

To enhance the safety of the fusing section unit, CPU provides the following protection: When the third [C410] error has occurred after two consecutive [C410] errors, the IH coil is not turned ON and error [C410] is displayed immediately even if an operator turns OFF the power and back ON.

However, if the equipment goes into a ready state normally with the thermistor/heater status counter “1” or below, the counter is cleared to “0”.

If the error codes [C410] to [C450] are displayed and still not cleared even though the thermis- tor, thermostat and IH coil have been repaired (and the power ON/OFF does not clear the er-

Reference

*The thermistor/heater status counter never has values other than 0-18.

If the IH coil does not turn ON and the service call [C410] is displayed immediately after the power is ON, ensure the thermistor/heater status counter is “2” or over. If it is “2” or over, be sure to check the thermistor, thermostat and IH coil. Reset the counter to “0” (Setting Mode (08-400)) after repairing them, then turn ON the power.

If the thermistor/heater status counter is “19” or over (e.g., 21), the data in NVRAM or NVRAM itself may possibly have been ruined due to causes such as leakage from the char- gers. Check the bias, high-voltage transformers and charge wires to see if any of them is defective, and also look through all the data in the NVRAM.

When the thermistors detect overheating, the CPU decides the error code and counter value of the fuser roller thermistor status. After turning OFF each output (the IH coil, exposure lamp, control panel display, motors and so on), the CPU turns OFF the power to protect the fuser unit.

Error code: C440 ([C] and [8])

Counter value of the fuser roller thermistor status: 9 (08-400)

Thermistors continue detecting the abnormal temperature even after the error codes and counter values are decided. Even if the power is turned ON immediately, it is automatically turned OFF again when the surface temperature of the fuser roller is still higher than the abnormal temperature detected.

Wait until the surface temperature of the fuser roller is lowered enough, and turn ON the power to check the counter value while it is turned OFF again. After confirming that it is the

IH control abnormality, correct the abnormality and clear the counter value (08-400) to "0" to start up the equipment normally.

e-STUDIO350/352/353/450/452/453

13 - 10 © 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved

FUSER UNIT / PAPER EXIT SECTION

 

Page 248
Image 248
Toshiba 452, 453, 350, 353 service manual Reference

350, 353, 453, 452 specifications

The Toshiba 452, 282, and 352 models represent a significant leap in multifunction printing technology, designed for office environments that prioritize efficiency, reliability, and advanced features. These models are part of Toshiba's commitment to innovation and sustainability, emphasizing quality output while reducing environmental impact.

One of the standout features of the Toshiba 452, 282, and 352 is their exceptional print quality. These multifunction printers utilize a high-resolution printing technology that ensures sharp text and vibrant images, making them suitable for a wide range of business applications, from standard documents to high-quality marketing materials. The printers are equipped with a versatile paper handling system, allowing users to accommodate various paper sizes and types, thereby enhancing their overall productivity.

In terms of speed, these models deliver impressive performance, with the capability to print up to 45 pages per minute for the 452, 28 pages per minute for the 282, and 35 pages per minute for the 352. This high-speed output is coupled with a fast first-page out time, ensuring that users spend less time waiting and more time focusing on their core business activities.

Moreover, the Toshiba 452, 282, and 352 are designed with user-friendly interfaces. Their intuitive touch-screen displays simplify navigation and operation, allowing users to quickly access frequently used functions. Customizable workflows and one-touch shortcuts further enhance usability, enabling employees to optimize their time in busy office settings.

Another crucial aspect of these models is their commitment to energy efficiency. Toshiba employs advanced technologies to ensure that the printers consume less power without compromising on performance. This not only helps businesses reduce their carbon footprint but also contributes to cost savings on energy bills.

Security is another critical feature integrated into the Toshiba 452, 282, and 352. With the increasing importance of data protection, these printers offer robust security measures, such as user authentication, secure printing, and data encryption. These features help safeguard sensitive information and ensure compliance with industry regulations.

Additionally, the multifunction capability of these printers allows them to serve as copiers, scanners, and fax machines, providing a comprehensive solution for office document management. Their ability to scan documents to email or to network folders enhances collaboration among team members.

In summary, the Toshiba 452, 282, and 352 models are versatile multifunction printers that offer a blend of speed, quality, and user-friendly features. Their commitment to sustainability and security makes them ideal choices for modern office environments looking to enhance productivity and efficiency.