Toshiba 353, 452, 453, 350 service manual Lower transport roller

[O] Lower transport roller

(1)Take off the ADU, ADU inside rear cover, ADU opening / closing switch, paper guide, and ADU cover ( Chapter 14.5 [A] to

14.5[E]).

(2)Take off the ADU motor, the ADU gear unit and the ADU clutch ( Chapter 14.5 [J] to

14.5[L]).

(3)Remove the clip on the rear side.

(4)Remove the clip, pulley, belt and pin on the front side.

(5)Remove 2 bushing and take off the lower transport roller.

(6)Remove 4 E-rings and take off 2 rollers.

Notes:

1.The roller has a one-way clutch inside. When installing rollers, pay attention to the rotation direction.

2.Replace 2 rollers at a time.

Clip

Fig. 14-533

Pin

Belt

Clip

Pulley

Fig. 14-534

Bushing

Lower transport roller

Bushing

Fig. 14-535

E-ring

Roller

E-ring

Roller

E-ring

Fig. 14-536

14

© 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved 14 - 19	e-STUDIO350/352/353/450/452/453
	AUTOMATIC DUPLEXING UNIT