Toshiba 350, 452, 453, 353 service manual Paper stock sensor, Separation roller

9

(H-4) Paper stock sensor

(1)Take off the drawer feeding unit

( Chapter 10.4 (H-1)).

(2)Pull up the paper stock sensor arm.

(3)Disconnect the connector and release the latch to take off the paper stock sensor.

(H-5) Separation roller

(1)Take off the drawer feeding unit

( Chapter 10.4 (H-1)).

(2)Remove 1 screw and take off the separation roller holder.

Paper stock sensor

Paper stock

sensor arm

Fig. 9-468

Screw

Separation roller holder

Fig. 9-469

(3)Detach the lever from the holder and take off the separation roller with the shaft.

(4)Detach the cover, the arbor, the clutch spring and the washer from the shaft, and then take off the separation roller.

Lever

Separation roller

Fig. 9-470

Arbor

Cover

Clutch spring

Separation roller

Washer

Shaft

Arbor

Fig. 9-471

e-STUDIO350/352/353/450/452/453	9 - 28 © 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved
PAPER FEEDING SYSTEM