Tuner Hold: On
ANT 1

Chapter 8: Using the TV’s features

Displaying the Channel Banner

To display the channel banner:

Press RECALL on the remote control.

The following information will display in the channel banner (if applicable):

Current input (ANT 1, ANT 2, VIDEO 1, etc.)

If ANT 1 or ANT 2 is the current input, whether it is

Cable TV (“CABLE”) or STEREO off-air (“TV”)

Understanding the auto power off feature

The TV will automatically turn itself off after approximately 15 minutes if it is tuned to a vacant channel or a station that completes its broadcast for the day. This feature functions in ANT 1 and ANT 2 modes only.

Channel number (if in ANT 1 or ANT 2 mode)

Signal strength indicator (bar graph in lower right corner of banner; for ATSC signal only)

NC-17

On Timer: Weekdays 12:00pm

Sleep Timer: 18 min.

Game Timer: 28 min.

Natural

 

CABLE 81-1

1080i

5:32pm

Sample channel banner screen

Understanding the last mode memory feature

If the power is cut off while you are viewing the TV, the Last Mode Memory feature automatically turns on the TV when the power is resupplied.

Note: The signal strength indicator will react to fading and increasing signals and could display longer than the normal channel banner screen.

Time (if set)

On/Off timer settings (if set)

Remaining time on sleep timer (if set)

Remaining time on game timer (if set)

Stereo or SAP audio status

V-Chip rating status

Picture size

Tuner hold* (if applicable)

*If you are recording on one tuner (for example, the digital tuner), you will be able to change channels on the other tuner only (the analog tuner in this example). The tuner from which you are recording is Òon holdÓ (i.e., locked) so your recordings will not be affected by channel changes.

Aspect ratio

To close the channel banner:

Press RECALL again.

Note: You should unplug the TVÕs power cord if it is possible that you will be away from the TV for an extended period of time after the power is restored.

Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.

97

 

Page 97
Image 97
Toshiba 50HPX95 Displaying the Channel Banner, Understanding the auto power off feature, To display the channel banner