
Selecting the Audio OUT sound
This feature allows you to select the sound (MAIN or PIP) that is output from the Audio OUT jacks.
This is useful when amplifying or recording the PIP sound with external equipment while hearing the sound of the main picture through the
To select the Audio OUT sound:
1.Press MENU, then press x or • until the AUDIO menu appears.
2.Press y or z to highlight AUDIO OUT.
3.Press x or • to highlight MAIN or PIP.
AUD I O |
|
SBS | ON |
SBS L E V E L | 1 0 0 |
SPEAKERS | ON |
AUD I O OUT | MAIN / P I P |
STABLE SOUND | OFF |
MENU
yzx •
Introduction |
|
|
|
|
|
Connecting | yourTV |
|
|
the | Control |
• | MAIN : | Main picture sound. |
• | PIP : | Selected PIP sound. |
Using the StableSound® feature
The StableSound® feature limits the highest volume level to prevent extreme changes in volume when the signal source is changed.
To turn on the StableSound feature:
1.Press MENU, and then press x or • until the AUDIO menu appears.
2.Press y or z to highlight STABLE SOUND.
3.Press x or • to select ON.
AUD I O |
|
SBS | ON |
SBS L E V E L | 8 0 |
SPEAKERS | ON |
AUD I O OUT | P I P |
STABLE SOUND | ON / OFF |
To turn off the StableSound® feature:
Highlight OFF in step 3 above.
Note:
When the StableSound® feature is turned on,
the surroundfeature is automatically turned off (see page 46).
Using | Remote |
|
|
Settingup | yourTV |
|
|
|
|
UsingtheTV’s | Features |
|
|
|
|
Appendix |
|
|
|
49