102 Picture and Sound Controls
MPEG NR
The MPEG noise reduction feature allows you to reduce visible
interference caused by MPEG compression.
1 Press the MENU button.
2 Select Picture > Advanced Picture Settings > Noise Reduction
and press the OK button.
3 Press the p/q (arrow) buttons to select MPEG NR and press the
OK button.
4 Press the p/q (arrow) buttons to select Low, Middle, High, or
Off.
5 Press the EXIT button.
NOTE
If the picture mode is set to Game or PC, this feature is not available.
DNR (Dynamic Noise Reduction)
DNR is a Dynamic Noise Reduction technology that î‚¿lters out video
noise without decreasing picture sharpness.
1 Press the MENU button.
2 Select Picture > Advanced Picture Settings > Noise Reduction
and press the OK button.
3 Press the p/q (arrow) buttons to select DNR and press the OK
button.
4 Press the p/q (arrow) buttons to select Low, Middle, High, Auto,
or Off.
5 Press the EXIT button.
NOTE
The differences may not always be noticeable. For the best results, use
lower settings, as picture quality may be greatly reduced if the setting is too
high.
If the picture mode is set to Game or PC, this feature is not available.
Using the advanced picture settings features