Initial Setup and Menu 59
2 Press the q (arrow) button to select Interval Time.
v0.125 sec
v0.25 sec
v0.375 sec
v0.5 sec
v0.625 sec
v0.75 sec
v0.875 sec
v1 sec
v After the interval time is selected, press the RED button to
show the Test screen. The test will start automatically.
3 Press the OK button.
Press the OK button on the IR Blaster Setup complete screen.
Flip Bar Wizard screen will appear.
9 Flip Bar
The Flip Bar function adds thumbnails of programs currently
being broadcast for set channels, the channel being watched at
the same time the previous day, or the channel being watched at
the same time one week previously to the bottom of the screen,
making it easy for you to choose a channel. Up to 10 thumbnails
can be displayed.
Thumbnails can be displayed at the bottom of the screen for the
following types of channels.
• Favorite Channels: Channels set as Favorite Channels.
• Yesterday*: The channel being watched at the same time the
previous day.
• Last Week*: The channel being watched at the same time one
week previously.
* Starting with the channel being watched at the same time,
up to 10 thumbnails can be displayed for channels watched
afterward, measured at intervals of 30 minutes. A channel
must have been watched for at least 2 minutes to be included.
NOTE
v Time information is required for the Flip Bar. Time information is
received through a network connection or digital broadcast signals.
A network connection is recommended for correctly receiving time
information.
When receiving time information through digital broadcast signals, it
is required to set the channel to receive time information for in the Flip
Performing the initial setup