Picture and Sound Controls 99
4 Press the EXIT button.
vThe picture mode can also be changed by pressing the PIC MODE
button on the remote control.
NOTE
The picture mode you select affects the current input only. You can select a
different picture mode for each input.
Adjusting the picture quality
The adjustments you make to picture quality under a picture mode are
saved to that picture mode.
Selection Press (t) Press (u)
Backlight* Darker Lighter
Contrast Lower Higher
Brightness Darker Lighter
Color Paler Deeper
Tint Reddish Greenish
Sharpness Softer Sharper
* Backlight: Adjusts the brightness of the entire screen. When in video mode and
no signal is input, this selection is set to 0. (Settings are stored in memory.)
To adjust the picture quality:
1 Press the MENU button.
2 Select Picture and press the OK button.
3 Press the p/q (arrow) buttons to select the setting you would
like to adjust (Backlight, Contrast, Brightness, Color, Tint, or
Sharpness).
4 Press the u (arrow) button.
5 Press the t/u (arrow) buttons to adjust the setting.
6 Press the EXIT button.
NOTE
v Any picture settings that you adjust affect the current input only.
You can adjust the picture quality separately for each input.
vDepending on a Sharpness value, the Edge Enhancer effect may be
reduced.
Adjusting the picture