Picture and Sound Controls 113
Selecting the analog audio output format
Set the type of analog audio that is output from the ANALOG AUDIO
OUT terminal.
1 Press the MENU button.
2 Select Sound > Analog Audio Output and press the OK button.
3 Press the p/q (arrow) buttons to select Fixed or Variable.
Fixed: Audio is output at a constant volume level.
Variable: The volume level can be adjusted on the TV.
4 Press the EXIT button.
Digital Audio Selection
You can switch to DTV broadcast digital audio.
1 Press the MENU button.
2 Select Sound > Digital Audio Selection and press the OK button.
3 Press the t/u (arrow) buttons to select your preferred language.
4 Press the EXIT button.
NOTE
This operation cannot be performed when receiving ATV broadcasts or
watching externally input video.
Using the Dolby® Digital Dynamic Range Control feature
You can further compress Dolby® Digital and Dolby® Digital Plus
dynamic range so you can switch from digital to analog broadcasts at the
same dynamic range.
1 Press the MENU button.
2 Select Sound > Dynamic Range Control and press the OK button.
3 Press the p/q (arrow) buttons to select On.
NOTE
This feature is available when Dolby® Digital or Dolby® Digital Plus is input
to the TV in the following situations:
vWhen tuned to a digital RF channel
vWhen an HDMI® input is used
vWhen network devices are used
This feature will also affect Digital Audio Output when the optical audio
output format is set to PCM.
Adjusting the audio