Toshiba 6530C 3 Specify the following items as required and press [OK], 4 Continue to another network setting if required, then press [APPLY NOW]

2 GA-1211/GA-1310 SPECIFIC FUNCTIONS

3 Specify the following items as required and press [OK].

ENABLE HTTP SERVER — Press [ENABLE] to enable the HTTP network server service, or [DISABLE] to disable the HTTP network server service. This option must be enabled for using the following functions:

yTopAccess

yThe e-Filing web utility

yGA-1211/GA-1310 specific print functions

yGA-1211/GA-1310 specific scan functions

[PRIMARY PORT NUMBER] — The default primary port number “80” is always used. This port number cannot be changed.

[SECONDARY PORT NUMBER] — The default secondary port number “8080” is always used. This port number cannot be changed.

ENABLE SSL — Press [ENABLE] to enable SSL for accessing TopAccess and the e-Filing web utility, or [DISABLE] to disable SSL for accessing TopAccess and the e-Filing web utility. When this option is enabled, the data transferred between the equipment and client computers will be encrypted using a private key when operating TopAccess and the e-Filing web utility.

yTo enable SSL, you must create a self-signed certificate in the equipment or import a server certificate using TopAccess. If the self-signed certificate is not created or the server certificate is not imported, SSL cannot be enabled. For details on SSL, refer to the TopAccess Guide.

yTo use the GA-1211/GA-1310 specific scan functions (the Fiery Remote Scan utility and [SMB/FTP/ OTHER]), SSL must be disabled.

4 Continue to another network setting if required, then press [APPLY NOW].

The “NETWORK INITIALIZING” message is displayed and the equipment starts initializing the network interface card to apply the changes.

34 Operations from the Control Panel