Toshiba 6530C „Error codes on print jobs, Error Codes

3 TROUBLESHOOTING

Error Codes

TopAccess has the pages for the job lists; print, transmission, reception, and scan jobs. The following error codes are shown on these pages in the [Logs] tab (successful jobs have no codes). These codes help you specify the cause of an error you might encounter.

The error codes are also shown on the [LOG] window of the touch panel. See the following lists when you find an error code on the touch panel. For instructions on how to display the [LOG] window, refer to the Printing Guide.

Error codes on print jobs

Error Code			Problem Description	Corrective Action

4501			Job was canceled because the unacceptable	Select the appropriate paper size and perform printing again.
			paper size was specified.

4502			Job was canceled because the unacceptable	Select the appropriate paper type and perform printing again.
			paper type was specified.

To find information about error codes other than the above, refer to the Troubleshooting Guide.

Error Codes 47

Contents

Page Page „How to read this manual ‰Symbols in this manual ‰Screens ‰Trademarks Page CONTENTS Chapter RESTRICTIONS Chapter 2 GA-1211/GA-1310SPECIFIC FUNCTIONS TROUBLESHOOTING Page Software Included in the e-STUDIOClient Utilities CD-ROM „COPY „SCAN „PRINT „FAX „USER FUNCTIONS ‰USER menu in USER FUNCTIONS ‰ADMIN menu in USER FUNCTIONS „JOB STATUS „INTERRUPT „Launching TopAccess „TopAccess top page „Registering from TopAccess ‰Registering private templates ‰Setting up mailboxes „Setting up from TopAccess ‰Setup page ‰Setting up Network settings Setting up SNMP Network Service Setting up Security Service ‰Setting up Print Service settings „Maintaining from TopAccess ‰Registering public templates ‰Registering Fax and Internet Fax received forward Software Included in the e-STUDIOClient Utilities CD-ROM Page „Turning power off (Shutdown) „MENU ‰Scan to USB Scanning to USB 1 Place the original(s) 2 On the control panel, press the [SCAN] button to enter the SCAN menu 3 Press [USB] To store the scan in the USB storage device, connect Page 6 Press [SCAN] ‰Scan to SMB/FTP/OTHER 4 Continue the operation as required 5 Specify the following items as required and press [OK] 6 Specify the following items as required and press [OK] 7 Specify the following item as required and press [OK] 8 Specify the following items as required and press [OK] 9 When the SMB/FTP/OTHER menu reappears, press [OK] 10 Press [SCAN] 12 Check whether the scanned data is stored in the specified location Regarding restrictions on Scan to SMB/FTP/OTHER ‰Setting the TCP/IP protocol (IPv4) ‰Setting the HTTP network service 3 Specify the following items as required and press [OK] 4 Continue to another network setting if required, then press [APPLY NOW] „Launching TopAccess from the WebTools home page „Registering or editing GA-1211/GA-1310specific private templates Page 6 Click [Edit] to define or edit the template properties 7 Select the [SMB/FTP/OTHER] check box and click [Select Agent] After configuring the desired template properties, click [Save] ‰Panel Setting (Private template) ‰SMB/FTP/OTHER Setting (Private template) Page ‰Scan Setting (Private template) Page „Registering or editing GA-1211/GA-1310specific public templates „Notice on the department management/user authentication Page Page „The scanned data cannot be saved in the specified location „Error codes on print jobs Page INDEX Page Page MULTIFUNCTIONAL DIGITAL COLOR SYSTEMS Operator's Manual Series with GA-1211 Series with GA-1310