4 Replacement Procedures
4-2 Minnesota 10M/10MG Series Maintenance Manual
The example below shows FRUs to be removed before the CPU can be removed. The CPU is
located on the system board. The USB board and the system fan are attached to the system
board. The system board itself is located under the top cover. The keyboard must be removed
before the display assembly can be removed. The HDD, expansion memory module, PC card
module and ODD in turn need to be removed. Always start the disassembly process by
removing the battery pack and optional devices and then move downwards through the table
to access the required component.
Battery Pack
HDD Expansion Memory PC Card ODD Keyboard
Top Cover
Bluetooth
Module Touch
Pad
Finger
print
Module Speakers Function
Button
Board
USB
Board MDC
Card Wireless
Module System
Fan Display
Assembly
System Board FL Inverter
VGA Board Heat Sink LCD
Module
CPU Camera and
Microphone