4 Replacement Procedures
4-46 Minnesota 10M/10MG Series Maintenance Manual
3. Remove the Touch Pad bracket by sliding it away from you and lifting it gently.
Figure 4-53 Removing the touch pad bracket
4. Remove the Touch Pad by lifting it gently.
Figure 4-54 Removing the touch pad
Installing the Touch Pad
To install the Touch Pad, follow the steps below and refer to the figures in the preceding
section:
1. Turn the top cover upside down and place the Touch Pad in position.
2. Place the Touch Pad Bracket in position on top, sliding it down into place.
3. Secure the Touch Pad bracket with one M2.5x4 screw.