Operating Basics
■
■Be sure to connect the AC adaptor when you write or rewrite.
■Be sure to close all other software programs except the writing software.
■Do not run software such as a screen saver which can put a heavy load on the CPU.
■Operate the computer at full power. Do not use
■Do not write while virus check software is running. Wait for it to finish, then disable virus detection programs including any software that checks files automatically in the background.
■Do not use hard disk utilities, including those intended to enhance HDD access speed. They may cause unstable operation and damage data.
■Write from the computer's HDD to the CD. Do not try to write from shared devices such as a LAN server or any other network device.
■Writing with software other than RecordNow! has not been confirmed. Therefore, operation with other software cannot be guaranteed.
When writing or rewriting
Note the following when you write or rewrite a
■Always copy data from the HDD to the CD. Do not use
■Do not perform any of the following actions:
■Change users in the Windows XP operating system.
■Operate the computer for any other function, including use of a mouse or Touch Pad, closing/opening the LCD panel.
■Start a communication application such as a modem.
■Apply impact or vibration to the PC.
■Install, remove or connect external devices, including the following: PC card, USB devices, external display, i.LINK devices, optical digital devices.
■Open the optical media drive.
■If the media is poor in quality, dirty or damaged, writing or rewriting errors may occur.
■Set the computer on a level surface and avoid places subject to vibration such as airplanes trains, or cars. Do not use an unstable surface such as a stand.
■Keep mobile phones and other wireless communication devices away from the computer.
User’s Manual |
