Satellite A500/A500D

3.The “Enroll” screen is displayed. Click the non-enrolled finger icon above the finger and click Next.

4.The note for enrollment operation screen is displayed. Confirm the message and click Next.

5.The Scanning Practice screen is displayed. You can practice swiping your finger. When you have finished practicing swiping your finger, click Next.

6.The last step for enrollment screen is displayed. Swipe three times with the same finger. If scan of fingerprint succeeds, “Enrollment succeeded! Do you want to save this fingerprint?” will show, click “OK”.

7.In case of finger injury or authentication failure, it is recommended that another fingerprint also be enrolled. The following message will be displayed: “It’s strongly recommended you enroll one more fingerprint”. Click OK and repeat steps 3, 4, 5 and 6 with another finger.

How to Delete the Fingerprint Data

Saved fingerprint data is stored in the Non-volatile memory inside the fingerprint sensor. If you hand over the PC to others, or dispose of it, the following operations are recommended.

1.Click Start ->All Programs ->TOSHIBA ->Utilities ->TOSHIBA Fingerprint Utility.

2.The TOSHIBA Fingerprint Utility main menu screen is displayed.3.Swipe your enrolled finger to enter the main menu.4.Delete fingerprints:To delete individual fingerprints:1.Click “Enroll”.2.Click the fingerprint mark above the registered finger.

3.“Are you sure you want to delete this template?” will be displayed on screen, click OK button. If you want to delete the other finger, repeat step 2,3.

To delete for all user’s fingerprints:

1.Click “Run as administrator” in lower left. If UAC setting for windows is off, this button won’t appear.

2.[User Account Control] window is displayed when you click “Run as administrator”. Select “Allow” on [User Account Control] window.

3.Swipe your enrolled finger.4.Click “Fingerprint control”.5.Click [Delete All] button in the lower right.

6.“Are you sure you want to delete all fingerprints?” will be displayed on screen, click OK button.

User’s Manual

4-7