DTV auto tuning, auto programme update,

manual tuning, analogue switch off

NOTE: As new services are broadcast it will be necessary to re-tune the television in order to view them.

Auto Tuning

Auto tuning will completely re-tune the television and canbe used to up date the channel list.It is recommended that Auto tuning is run

periodically to ensure that all new services are added. All current programmes and settings, i.e. favourites and locked programmes, will be lost.

1Press MENU and use S or R to select SETUP. Use Q to highlight Auto Tuning. Press OK.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SETUP

1/2

 

Language

 

English

 

Country

 

UK

 

Auto Tuning

 

 

 

ATV Manual Tuning

 

 

 

DTV Manual Tuning

 

 

 

DTV Settings

 

 

 

Manual Setting

 

 

 

AV Connection

 

 

 

A screen will appear warning that previous digital programmes and settings will be deleted.

Auto Tuning

Previous settings will be lost! Press

EXIT for no change. Press OK to start

Auto tune.

ATV and DTV

2Use S or R to select DTV then press OK to continue with the Auto tuning.The television will start to search for all available DTV stations.

You must allow the television to complete the search.

When the search is complete the Auto Tuning screen will display the services found.

3Use Q or P to move through the list to select a programme then press OK to view.

Auto Programme Update

If Auto Programme Update is set to On when thetelevision is in standby mode Digital Tuning willautomatically execute and new programmes will be stored.1Press MENU and use S or R to select SETUP.2Use Q to highlight DTV Settings and press OK.3Press Q to select Auto Programme Update and use S or R to select On.

Manual Tuning

This feature is available for service engineers or can be used for direct channel entry if the multiplex channel is known.

1Select DTV Manual Tuning from the SETUP menu and press OK.

2Enter the multiplex number using the number buttons or use S or R to adjust the number and then press OK. The television will automatically search for that multiplex.

When the multiplex is found any channels not currently on the programme list will be added and the programme information at the top of the screen will be updated.

3Repeat as necessary. Press EXIT to finish.

Analogue Switch-off

This is a digital television which is integrated to allow the use of both digital and analogue services. However, during the lifetime of this set it is very likely that analogue services will be switched off to allow for more new digital services.

This ‘switch-off’ will happen in a number of phases, which will be advertised in your area well in advance. It is recommended that at each phase the television is re-tuned to ensure that existing and new digital services can be viewed without disruption.

12