Page
Page
do’s
don’ts
IF IN DOUBT PLEASE CONSULT A COMPETENT ELECTRICIAN
DO read the operating instructions before you attempt to use the equipment
DO be careful with glass panels or doors on equipment
DO NOT
WARNING
the screen
Clip
Side View
Top View
i)fire;
Simple at-a-glancereference of your remote control
Sound Mute
Number buttons
To return to the previous programme
To display the digital on-screen
Decoder
MediaRecorder
Aerial cables:
SCART leads:
Before running Auto tuning put your decoder and media recorder to Standby
Lip Sync
Supported Audio format: Linear PCM, sampling rate 32/44.1/48kHz
HDMI cable with the HDMI Logo ( ) is used
HDMI device
To view the HDMI device video, press the Bto select HDMI1 or HDMI2 mode
Computer
the back of your television
Acceptable signals through HDMI terminals
Format
Resolution
Press the MENU button on the remote control to see the menus
IMPORTANT:
To alter the volume press — j+
To alter the programme position press eFf
Press MENU and S, R, Q or P to control the sound and picture options
Standby
Press the
2Using Q highlight Language, then Sor R to select
Language
Country
Auto tuning will completely re-tunethe television and can
be used to up date the channel list
It is recommended that Auto tuning is run
2Use S or R to select DTV then press OK to continue with the Auto tuning
The television will start to search for all available DTV stations
preference
and select the
menu
to move down through the list and highlight
. Press
ATV Manual Tuning
System
Programme System Colour
Skip
Channel Searching Manual Fine
9Press OK to store
11Press EXIT when you have finished
To name external equipment
DVD on EXT2, press
to select
To select a programme position use the numbered buttons on the remote control
Programme positions can also be selected using Pe and Pf
To revert to the previous programme position press ^
i.e
Press Bat any time to select between ATV and DTV modes
Volume
Press j—– or j+ to adjust the volume
Sound Mute
Press konce to turn the sound off and again to cancel
The sound controls are accessible in digital and
Wide
Super Live
Cinema
4:3
Subtitle
(when available). Due to the range of
Use this setting to view a true 4:3
broadcast
AV FORMAT
This option is only available when
analogue modes
PLEASE NOTE: features not available will be greyed out
The picture position may be adjusted to suit personal
preference and can be particularly useful for
external inputs
Settings can be personalised as detailed below
PC option is available in HDMI input mode
1Select Picture Settings from the PICTURE menu
2Use S or R to adjust the Contrast, Brightness, Colour, Tint and Sharpness
Black/White Level increases the strength of dark areas
1In the PICTURE menu press Q to select 3D Colour Management
The Base Colour Adjustment feature allows the
adjustment of individual colours to suit personal preference
This can be useful when using an external source
2Press P and Q to select an option, then R to adjust the settings
television’s previous setting
1Press MENU and S or R to select the FUNCTION menu
2Press Q to highlight Auto Format, then S or R to select On or Off
Auto Format
When 4:3 Stretch is activated the size switching system
1Press MENU and Sor R to select the TIMER menu
2Press Q to select Programme Timer, then press OK to select
Programme Timer
SET TIMER
the number buttons as well as Sand R to make selections
Select information by pressing
To see details of any of the other channels currently available, press
Now
Next
Also
The time scale can be changed to 1.25 or 2.5 hours by pressing the RED button
RED
broadcast will appear. Press S or R to view information on future features
Press l
Guide
1Press MENU and R to select the SETUP menu
3Use Q to select PIN Setting then press OK
PIN Setting
A screen will appear with the choice to Enable or
Enable
Programme Options
1From the DTV Settings menu press Q to select Programme Options and press OK
2Use S and R to select the first List, then P and Q to select programmes
3Press OK to select the ones required, a tick will appear in the box
2Press P and Q to highlight a programme then OK to select
1From the SETUP menu press Q to select DTV Settings
2Press OK, then press P and Q to highlight Subtitle
3Press Q to select Subtitle and use S and R to select On or Off
S and R to select an option
This feature allows a programme or film to be viewed with
1From the SETUP menu press P or Q to select System Information
Software Version
Auto Upgrade
manually using Search for New Software
1In the SETUP menu press P or Q to select Software Upgrade
Input
EXT3C
EXT4
EXT 2S
At any time by pressing
Modes
Auto
Fastest
LIST
The text character set will be automatically chosen by the
Below is a guide to the functions of the remote control text buttons
T To display the index/initial page:
6//7To display a page of text:
X To access sub-pages:
For use with the RED and GREEN buttons to view sub- pages when available
Q Why is there no sound or picture
Q There is a picture, but why is there little or no colour
Q Why doesn’t the video/DVD being played show on screen
Q Why is there a good video picture but no sound
Q Why is there a picture but no sound
Q Why is the digital channel locked
Q Why can only certain digital channels beviewed
Q Why are some of the digital subscription channels unavailable
DTV mode
Q What can be done if the PIN number hasbeen forgotten
HDMI mode
Q Why is the Parental Control setting greyedout
Page
Page
Page
PAL-I
France
05-10(VHF 01-05)
UHF E21-E69
Germany