Toshiba AV55 i.e, DTV, ATV, Mono, I/II, I/II, Mono, Stereo, Stereo, Stereo…, Surround, Dual Mono, For ATV programmes, For DTV programmes, The settings are as follows:

General controls, time display (ATV only),

stereo/bilingual transmissions

Selecting Programme Positions

To select a programme position use the numbered buttons on the remote control.Programme positions can also be selected using Pe and Pf.To revert to the previous programme position press ^.

To display on-screen information i.e. programme position, channels, stereo/mono signal, signal strength, date and time, press i+ . Press again to cancel. The information shown will vary depending on whether the television is in DTV or ATV mode.

Press Bat any time to select between ATV and DTV modes.

Time Display (ATV only)

The time display facility allows the current (text service)time to be seen on the television screen.

Press 8/9whilst watching a normal television broadcast to see a time display from the broadcaster. It will remain on screen for about 5 seconds.

NOTE: This display may not always be available.

Stereo and Bilingual Transmissions

If stereo or dual language broadcasts are transmitted the word Stereo or Dual will appear on the screen each time programme positions are changed, disappearing after a few seconds. If the broadcast is not in stereo the word Mono will appear.

For ATV programmesStereo… Press OI/II to select Stereo or Mono.

Bilingual… Bilingual transmissions are rare. If they are transmitted the word Dual will display. Choose the required programme number and if the word Dual appears press OI/II to select Dual 1, Dual 2 or Mono.

For DTV programmes

For stereo or dual mono broadcasts, press OI/II and use S or R to select settings.

The settings are as follows:

Stereo	Press R for Stereo ➝ Left ➝ Right
Dual Mono	Press R for Dual 1 ➝ Dual 2 ➝ Dual
Mono
Surround

16