Manuals / Brands / TV and Video / Flat Panel Television / Toshiba / TV and Video / Flat Panel Television

Toshiba AV55 e.g, DTV, ATV, EXT4, EXT2, Input, EXT3C, HDMI1, HDMI2, EXT 2S, Inputs, In the, select, S-VIDEO, Lip Sync, and using, menu press, to highlight, AV connection

1 40

Download 40 pages, 977.79 Kb

Input selection and

AV connections

Defining the INPUT and OUTPUT sockets so that the television recognises connected equipment. See page 7 for a clear view of the back connection recommendations.

Most media recorders and decoder send a signal through the SCART lead to switch the television to the correct Input socket.

Alternatively press the external source selection button Buntil the picture from connected equipment is shown.

This button must be used to view equipment connected using the COMPONENT VIDEO INPUT (EXT3C) and VIDEO INPUT (EXT4).

An S in the display e.g. B2S (EXT 2S), indicates the input is set for an S-Video signal.

Input Selection

1At any time by pressing Ba list will appear on screen showing modes and all stored external equipment. Use Q and P to highlight and OK to select.

Inputs

DTV

B1

B2

B3

B4

HDMI1

HDMI2

ATV

HDMI displays equipment connected to Input HDMI on the back of the television.

INPUT Signal Selection

This specifies the type of signal going into SCART 2 (EXT2)on the back of the television. Please refer to themanufacturers instructions for the connected equipment.1In the SETUP menu press Q untilAV connection is highlighted, then press OK.

2With S or R select either AV or S-VIDEOas the required input for EXT2.

AV Connection
HDMI1 audio	Auto
EXT2 input	AV
Lip Sync	On

If the colour is missing try the alternative setting.

HDMI1 Audio

If the connected HDMI source does not support digital audio, plug the audio cable into HDMI1 (Audio) on the back of the television (as shown in the ‘Connecting an HDMI or DVI device to the HDMI input’ section), then use the HDMI1 Audio settings.

1In the AV connection menu press Q to highlight HDMI1 audio and using S or R select Auto, Digital or Analogue.

If the sound is missing select an alternative setting.

NOTE: HDMI1 supports digital and analogue sound, HDMI2 is digital sound only.

Certain formats of DVD disk may not output from this TV (32/44.1/48kHz and 16/20/24 bits are acceptable).

Lip Sync

Lip Sync can synchronize the sound and picture. This feature is only available when equipment compatible with Lip Sync is connected via HDMI.

1In the AV connection menu press Q to highlight Lip Sync.2Using S or R select On or Off.

31

Contents

Page Page do’s don’ts IF IN DOUBT PLEASE CONSULT A COMPETENT ELECTRICIAN DO read the operating instructions before you attempt to use the equipment DO be careful with glass panels or doors on equipment DO NOT WARNING the screen Clip Side View Top View i)fire; Simple at-a-glancereference of your remote control Sound Mute Number buttons To return to the previous programme To display the digital on-screen Decoder MediaRecorder Aerial cables: SCART leads: Before running Auto tuning put your decoder and media recorder to Standby Lip Sync Supported Audio format: Linear PCM, sampling rate 32/44.1/48kHz HDMI cable with the HDMI Logo ( ) is used HDMI device To view the HDMI device video, press the Bto select HDMI1 or HDMI2 mode Computer the back of your television Acceptable signals through HDMI terminals Format Resolution Press the MENU button on the remote control to see the menus IMPORTANT: To alter the volume press — j+ To alter the programme position press eFf Press MENU and S, R, Q or P to control the sound and picture options Standby Press the 2Using Q highlight Language, then Sor R to select Language Country Auto tuning will completely re-tunethe television and can be used to up date the channel list It is recommended that Auto tuning is run 2Use S or R to select DTV then press OK to continue with the Auto tuning The television will start to search for all available DTV stations preference and select the menu to move down through the list and highlight . Press ATV Manual Tuning System Programme System Colour Skip Channel Searching Manual Fine 9Press OK to store 11Press EXIT when you have finished To name external equipment DVD on EXT2, press to select To select a programme position use the numbered buttons on the remote control Programme positions can also be selected using Pe and Pf To revert to the previous programme position press ^ i.e Press Bat any time to select between ATV and DTV modes Volume Press j—– or j+ to adjust the volume Sound Mute Press konce to turn the sound off and again to cancel The sound controls are accessible in digital and Wide Super Live Cinema 4:3 Subtitle (when available). Due to the range of Use this setting to view a true 4:3 broadcast AV FORMAT This option is only available when analogue modes PLEASE NOTE: features not available will be greyed out The picture position may be adjusted to suit personal preference and can be particularly useful for external inputs Settings can be personalised as detailed below PC option is available in HDMI input mode 1Select Picture Settings from the PICTURE menu 2Use S or R to adjust the Contrast, Brightness, Colour, Tint and Sharpness Black/White Level increases the strength of dark areas 1In the PICTURE menu press Q to select 3D Colour Management The Base Colour Adjustment feature allows the adjustment of individual colours to suit personal preference This can be useful when using an external source 2Press P and Q to select an option, then R to adjust the settings television’s previous setting 1Press MENU and S or R to select the FUNCTION menu 2Press Q to highlight Auto Format, then S or R to select On or Off Auto Format When 4:3 Stretch is activated the size switching system 1Press MENU and Sor R to select the TIMER menu 2Press Q to select Programme Timer, then press OK to select Programme Timer SET TIMER the number buttons as well as Sand R to make selections Select information by pressing To see details of any of the other channels currently available, press Now Next Also The time scale can be changed to 1.25 or 2.5 hours by pressing the RED button RED broadcast will appear. Press S or R to view information on future features Press l Guide 1Press MENU and R to select the SETUP menu 3Use Q to select PIN Setting then press OK PIN Setting A screen will appear with the choice to Enable or Enable Programme Options 1From the DTV Settings menu press Q to select Programme Options and press OK 2Use S and R to select the first List, then P and Q to select programmes 3Press OK to select the ones required, a tick will appear in the box 2Press P and Q to highlight a programme then OK to select 1From the SETUP menu press Q to select DTV Settings 2Press OK, then press P and Q to highlight Subtitle 3Press Q to select Subtitle and use S and R to select On or Off S and R to select an option This feature allows a programme or film to be viewed with 1From the SETUP menu press P or Q to select System Information Software Version Auto Upgrade manually using Search for New Software 1In the SETUP menu press P or Q to select Software Upgrade Input EXT3C EXT4 EXT 2S At any time by pressing Modes Auto Fastest LIST The text character set will be automatically chosen by the Below is a guide to the functions of the remote control text buttons T To display the index/initial page: 6//7To display a page of text: X To access sub-pages: For use with the RED and GREEN buttons to view sub- pages when available Q Why is there no sound or picture Q There is a picture, but why is there little or no colour Q Why doesn’t the video/DVD being played show on screen Q Why is there a good video picture but no sound Q Why is there a picture but no sound Q Why is the digital channel locked Q Why can only certain digital channels beviewed Q Why are some of the digital subscription channels unavailable DTV mode Q What can be done if the PIN number hasbeen forgotten HDMI mode Q Why is the Parental Control setting greyedout Page Page Page PAL-I France 05-10(VHF 01-05) UHF E21-E69 Germany