8. LOADING THE MEDIA
8. LOADING THE MEDIA
8. LOADING THE MEDIA
WARNING!
1. Do not touch moving parts. To reduce the risk that fingers, jewelry, clothing, etc., be drawn into the moving parts, push the switch in the “OFF” position to stop movement.
2.To avoid injury, be careful not to catch or jam your fingers while opening or closing the cover.
1.Install the holder stand on the rear of the printer.
2.Loosen the screw 
and slide the media guides outside.
Media Guides
Holder Stand
Release Lock
Screw | Fig. |
CAUTION:
DO NOT MOVE the Media Guides using the screw 
.
3.Lock the Media Holder securely with the Lock Lever.
4.Pass the Holder Shaft through the Media, then set one of the Media Holders and lock it securely with the Lock Lever.
Media Holder
Media Holder
Holder Shaft
Holder Shaft
Media | Lock Lever | Fig. |
Lock Lever
