Toshiba B-8204-QM-R Fix the cutter drive unit to the printer with the three SM-4x8screws

20) Fix the cutter drive unit to the printer with the three SM-4x8 screws.

SM-4x8 Screw

SM-4x8 Screw Cutter Drive Unit

21)Connect the 9-pin connector of the harness ass’y to CN7 and 2-pin connector to CN9 on the cutter driver unit, respectively.

Harness Ass’y

CN9 (2 pins) CN7 (9 pins)

22) Fit the bush to the harness ass’y in the orientation as shown below.

Bush

Harness Ass’y

23)Insert the harness ass’y into the hole in the main frame. Fit the bush into the hole.

Main Frame

Hole

Harness Ass’y

- 12 -