Toshiba B-SX5T, B-9700-LAN-QM-R, B9700LANQMR Strip Module B-9904-H-QM/QM-R option for the B-SX4T

3. OPTIONAL KIT

EO10-33013B

3.1 CUTTER MODULE: B-4205-QM/QM-R (Swing Cutter), B-8204-QM/QM-R (Rotary Cutter)

3.1CUTTER MODULE: B-4205-QM/QM-R (Swing Cutter), B-8204-QM/QM-R (Rotary Cutter)

This compact cutter module uses a built-in swing/rotary cutter. The specification is provided below:

Cutter Type

B-4205-QM/QM-R

B-8204-QM/QM-R

Cut method

Stop and cut

Rotary cut

Media width

B-SX4T

30.0 mm − 112.0 mm

B-SX5T

30.0 mm − 140.0 mm

30.0 mm − 112.0 mm

B-SX4T

Tag

25.4 mm − 1500.0 mm

3”/sec., 6”/sec.: 30.0 mm − 1500.0 mm

Media pitch

Label

38.0 mm − 1500.0 mm

3”/sec., 6”/sec.: 38.0 mm − 1500.0 mm

B-SX5T

Tag

25.4 mm − 1500.0 mm

3”/sec., 5”/sec.: 30.0 mm − 1500.0 mm

8”/sec.: 38.0 mm − 1500.0 mm

Label

38.0 mm − 1500.0 mm

38.0 mm − 1500.0 mm

Media thickness

Tag

0.15 − 0.29 mm

Label

0.13 − 0.17 mm

Cutter life

300000 cuts (0.274-mm thick tag paper)

1000000 cuts (0.160-mm thick tag paper)

Home position detection

Micro switch

Photo coupler

Swing: 32.8 mm

Print Head

Rotary: 77.1 mm

Pinch Roller

Feed Roller

3.2 STRIP MODULE: B-9904-H-QM/QM-R (option for the B-SX4T)

This strip module consists of the take-up block and the strip block. Installing the strip module enables the printer to not only remove labels from the backing paper, but wind the tag paper or label with backing paper onto the take-up spool by using the rewinder guide plate. The rewind full sensor is provided to detect the overflow if the wound tag paper or label exceeds the specified amount is provide.

3.3 RIBBON SAVING MODULE: B-9904-R-QM (option for the B-SX4T)

By moving the print head up and down with a solenoid, the ribbon saving module saves loss of the ribbon as far as possible. It is small enough to be put into the print block.

3.4RIBBON SAVING MODULE: B-9904-R2-QM/QM-R (option for the B- SX4T)

This ribbon saving module uses the solenoid with stronger pull force, which improves the ribbon saving function. It is necessary to upgrade the firmware to V1.2A or greater to use this module.

3- 2